Tabla de códigos de retorno. Hoja 2 - MuchoCATIA

Está Vd en: home>>CATDUA>>Tabla de códigos. Continuación.

 

La Tabla de Códigos de Retorno detectados por el Data Upward Assistant (CATDUA).

 

 

	El Data Upward Assistant tiene la capacidad de comprobar los datos estructurales dentro de un CATProduct, CATPart, CATDrawing, CATAnalysis, CATMaterial, CATProcess, y actualizar (modificarle) la estructura de datos.  Aqui puede encontrar una descripción de los codigos de retornos detectados por el Data Upward Assistant que incluyen: •   Niveles de severidad de los errores detectados, •  síntomas (opinión del usuario) de los errores detectados, •   problemas técnicos, •   operaciones CATDUA V5, •  Resultados de la ejecución del CATDUA V5 (que ve el usuario).
	Niveles de Prioridad Leyenda de los Niveles de Prioridad (significado de los numeros entre parentesis):   1:  Código de retorno de la prioridad Uno: La mejora efectuada puede conducir al borrado de datos.   2:  Código de retorno de la prioridad Dos: La mejora efectuada puede conducir a la modificación de los datos (sin borrar nada).   3: Código de retorno de la prioridad Tres: Error sin importancia. La acción de mejora no tiene gran impacto en los Datos.   (*) Este símbolo significa que la regla no está ejecutada en un documento que viene de un sistema de PDM (ENOVIAVPM, ENOVIA LCA).
	Error Dominio(Entorno) Sintoma (Visible para el usuario) Problemas Técnicos Operación que ejecuta CATDUA Después de ejecutar CATDUA (Visible para el usuario) Hoja anterior     DET_0 (3) (*) Drafting Document too big or/and extra links in Edit/Links. 2D component not used anymore. Deletion of the unused 2D component. Document is the same but smaller. DET_1 (3) (*) Drafting Document contains unusable elements and/or extra links. 2D component non typed through interface. They cannot be used anymore. Deletion of the unused 2D component. Document is the same but smaller. Extra links can disappear DET_2 (2) (*) Drafting 2D Component instance has its reference outside its document. Cut Copy Paste problems during V5R11 and V5R12. The 2D component reference is created inside the same document and replace the wrong one. The document is self-content again. No problem if external document disappears. DET_3 (1) Drafting 2D Component instance has too big or too small scale. Cut Copy Paste problems during V5R11 and V5R12. Deletion of the scale. The view that was containing such object recover his frame. DET_4 (2) (*) Drafting After exploding all 2D component instances (i.e. dittos) in a CATDrawing, Edit/Links shows residual external links to catalog. Redundant local reference exists in the model. They cannot be deleted by user. Instances of the redundant local reference are redirected to the good one and redundant local reference is deleted. Document size decrease. No more ghost link after exploding dittos. DET_6 (1) Drafting Unpredictable behavior when using a drafting detail/ditto. There is 2D component instance that is not structurally valid and must be discarded. The invalid 2D component instance is deleted. 2D Component instance can be exploded without error or crash. DET_7 (2) (*) Drafting Open a CATDrawing document, a warning with the following error message appears: "The files in the following list could not be found or contain the wrong information for the active document", but a document mentioned in the list does not appear when using File/Desk or Edit/links command. The user cannot correct the ghost link. During the explode operation of a 2DComponent instance, some instance/reference links were kept between some elements in the 2DComponent and the document where the 2DComponent was originally created. The fixing action consists in unplugging the View sub-components with ghost links from their "ghost" reference and to plug them again to their startups in current document. No more warning pop-up when opening the document, and no more GhostLink in SendTo command. DOB_0 (1) (*) Drafting A CATDrawing containing isolated views has still some links to 3D parts/product. This is detected when using File/SendTo. The breakout operator in Generative Drafting isolated views maintains some links to 3D documents, despite the fact that the view is isolated and no link should exist. The CATDUA modifies the breakout operator and deletes the links to 3D documents. No link to 3D will exist anymore on this operator - File/SendTo will not detect these links. DOC_1 (2) SpecsModeler A pointed document can not be loaded. The type of the pointed document is not specified in the symbolic link. The type is set according to the extension of the pointed document. Pointed document can be loaded. DOC_3 (2) SpecsModeler No visibility (can lead to the lost of a link until V5R10). Internal counter to determine whether a link to a document has to be kept not correctly valuated. Set the counter to the correct value. No visibility. DOC_4 (3) SpecsModeler Unused external links shown in Edit Links. Internal counter not correctly valuated. Set the counter to the correct value. In Edit Links, there are no more unused external links. DOC_5 (2) SpecsModeler Objects located in a pointed documents can not be accessed. A link to a container in a pointed document has been lost. The link to the container is rebuilt. Objects of the pointed document are accessible. DOC_6 (3) SpecsModeler A document cannot be stored in ENOVIAVPM. Applicative container with no stream in the document. Creation of an empty stream for this applicative container. The document can be stored in ENOVIAVPM. DOC_11 (3) (*) SpecsModeler SendTo on a CATPart shows a GhostLink to an useless CATPart. The Ref-Ref links repository contains no Input or Inputs that are no more pointed, so the link to the other CATPart owned by the repository is useless. The meaningless repository is deleted. SendTo does not show a link to a useless CATPart. DOC_7 (2) (*) Product Structure When working in context of corrupted CATProduct, changes made to a pointed sub-product or part are not saved. Undo is not working on this sub-product or part. Need to save information is corrupted. Establishes correct Need to save information in the link.. After close and reopen of data, modification will be taken into account. DOC_8 (3) Product Structure Bad performance when opening a document. When link counters in the index table of inter-document, it goes down to 0 (link no more seen by the user), ObjectModeler does not delete this link in Session, only CATDUA is authorized to perform this operation. The link that does not appear to end-user is deleted in table of inter-document links, the table is just compacted. Better performance at open. DOC_9 (3) Product Structure Update of a CATPart cannot be completed if there are more than one Ref-Ref link federator in the Ref-Ref link container. Only one object should federate the different pointed documents by Ref-Ref link for a given CATPart. If there is more than one, Ref-Ref links cannot be solved. Data contained in all federators are put into one federator and empty federators are deleted. Update is now possible. DOP_0 (1) (*) Generative Drafting A CATDrawing containing isolated views has still some links to 3D parts/product. This is detected when using File/SendTo. The projection operator in Generative Drafting isolated views maintains some links to 3D documents, despite the fact that the view is isolated and no link should exist. The CATDUA modifies the projection operator and deletes the links to 3D documents. No link to 3D will exist anymore on this operator - File/SendTo will not detect these links. DOS_0 (1) (*) Generative Drafting Unrelated document can be pointed by the drawing document (it appears using Send To). Ghost Link. A section operator has an invalid link. Deletion of the invalid link. No more Ghost Link in Send to command. DOS_1 (1) (*) Generative Drafting Unrelated document can be pointed by the drawing document (it appears using Send To). A section operator is not aggregated. Deletion of the object. No more ghost links in Send To command. DRF_0 (3) PartDesign When deleting the draft, some related data are left in the document. Data model Inconsistency. Remove Rsur Features from Geometrical Set to PartBody under Draft feature. Data model inconsistency is now solved for this draft feature. If deleting the draft the life cycle management will be better. Document needs to be updated. DRF_1 (3) PartDesign When creating a new draft feature the geometry selected to define the pulling direction is inconsistent with the pulling direction vector. Inconsistency between the vector and the selected object in the definition of default values. Default pulling direction in object and vector is reset. Default draft pulling direction is changed. The next created draft will use this new default pulling direction. DRW_0 (1) (*) Drafting No visibility. More than one drawing in the document. Others drawings are useless. Deletion of the useless drawings. No impacta, solo reduce el tamaño del documento. DRW_1 (1) (*) Drafting Ghost links might be visible in a part document via edit links, or a Part document's size might be strangely big. A DrwDrawing with external links is inside the CATPrtCont. It is not visible in the specstree. Removal of the DrwDrawing. El tamaño del documento se reduce. Desaparecen los los Links fantasmas en el comando SendTo. DST_0 (1) Drafting Balloon, datum feature, datum target, roughness symbol and coordinate dimension not displayed. A simple text must aggregate at least one sub-text. Delete annotation. No more annotation. DST_1 (1) (*) Drafting A ghost link appears in the old drawing containing a section view. The callout text kept old links after a copy-paste. Removes the link but keeps the text as it was. There isn't any ghost link anymore. The functionality that links the section view name to the callout text will not work on cleaned models, as it was already the case. DTE_0 (3) Drafting Ghost link visible in SendTo command and when opening the document. An internal drafting data is erroneously referencing another document. Deletion of the link. No behavior modification except no more ghost link when opening the document. DVB_0 (3) Part Design An Applicative Design Table cannot be deleted. Edit->Link command shows a link on a standard file which should not be shown. A Design table link found even when no feature was using it. In Part Document Design table link exists even though the Hole/ Thread feature using the standard is not available. The design table link is deleted. No more link in Edit/Link command. Applicative Design Table can be deleted. DVM_0 (2) Drafting Error when saving a CATDrawing. Useless viewmakeup detected. Deletion of the useless viewmakeup. CATDrawing is correctly saved. Reduce the size of the document. DWA_1 (3) Drafting Associativity between 3D and section (cut) views can be wrong. An object managing cut-views associativity is isolated and no more used by a view (it should have been removed). Deletion of the useless object. No impacta, solo reduce el tamaño del documento. DWC_1 (3) Drafting An incorrect profile section can be visualized in the drawing document. A profile section is isolated and no more used by a view (it should have been removed). Deletion of the useless object. No impacta, solo reduce el tamaño del documento. DWE_0 (1) Generative Drafting Ghost Link in SendTo command. Unrelated document can be pointed by the drawing document (using SendTo). An object managing links between Views and 3D document points an unrelated document. This can happen after replacing an assembly, if this assembly contains different structures. Deletion of the useless object. No more  ghost links in Send To command. DWG_0 (1) Drafting Unrelated part document is pointed by the drawing document. An object managing dimensions generation is no more used by a view (it should have been removed). Deletion of the constraint. Document needs to be updated. The constraint can be used again. DWG_1 (3) Drafting Unrelated part document can be pointed by the drawing document. An object managing dimensions generation is isolated (it should have been removed). Deletion of the useless object. No impacta, solo reduce el tamaño del documento. DWH_1 (3) Drafting Unrelated part document can be pointed by the drawing document. A generative hatching pattern is isolated (it should have been removed). Deletion of the useless object. No impacta, solo reduce el tamaño del documento. DWP_0 (3) Drafting No visibility. A not referenced pattern mapping table is useless. Deletion of useless pattern mapping table. No impacta, solo reduce el tamaño del documento. DWP_1 (1) Drafting No visibility. A pattern mapping table is not aggregated. Deletion of the pattern mapping table. No impacta, solo reduce el tamaño del documento. DWR_0 (3) Drafting No visibility. An useless relation has been detected: either the in or the out of the relation is (are) not valuated. Deletion of the useless DrwRelation. No impacta, solo reduce el tamaño del documento. DWS_0 (2) Drafting Impossible to select a view (not allowed), Grid disappear, or impossible to activate Drafting workbench. Internal value which determines the order of the views is not set correctly. Internal value set correctly : order of the views is correct. The view can be selected. DWS_1 (1) (*) Drafting No visibility. A corrupted sheet has been detected: either it has not the minimum required views (background and main view) or it is not under the drawing. Deletion of the corrupted sheet. No impact, reduce the size of the document. DWT_1 (3) Drafting Ghost Link in SendTo command. Pattern not aggregated correctly. Deletion of the Pattern. No more Ghost Link in SendTo command. DWV_0 (1) (*) Drafting No visibility. One or several rules for a view in the drawing is not respected: (1) a view must have a parent (2) a view of type Pure_sketch must not have a sheet as its parent (3) a view which is not of type Pure_sketch must have a sheet as its parent. Deletion of the View. CATDrawing is correctly saved. Reduce the size of the document. DWV_1 (2) Drafting Ghost Link in SendTo command. A View is linked with another Drawing. Deletion of the Link. No more Ghost Link in SendTo command. DWV_2 (2) (*) Drafting When opening a CATDrawing document, a warning with the following error message appears: "The files in the following list could not be found or contain the wrong information for the active document", but a document mentioned in the list does not appear when using File/Desk or Edit/links command. The user cannot correct the ghost link. During the explode operation of a 2DComponent instance, some instance/reference links were kept between some elements in the 2DComponent and the document where the 2DComponent was originally created. The fixing action consists in unplugging the View sub-components with ghost links from their "ghost" reference and to replug them to their startups in current document. No more warning pop-up when opening the document DWV_3 (3) Drafting The local transformations of geometries in views (like translations, scaling, rotations, offset) do not work, usually when some 2D Component instances have been exploded or exposed in the CATDrawing. The geometrical result of the axis component of a view has been lost. These geometries are necessary to perform operations on other geometries in the view. Update of the SketchSupport in order to rebuild the result. Local transformations are available again on geometries. Reduce the size of the model. Document needs to be updated. DWV_4 (3) Drafting Axis elements of the sketch support associated with a view that have been put in the no-show space before CXR14 cannot be visualized in the show space anymore. The sketch support is in the no-show space. The sketch support is put in the show-space and its axis elements are put in the no-show space. The sketch support axis elements can be seen in the show space (provided the user puts them in it). DWV_5 (3) (*) Drafting Ghost links appear in File/SendTo command from a CATDrawing. A useless link exist on the view to an external document. Remove the invalid link. No more ghost link from the drawing in File/SendTo/Directory. EDL_1 (3) Electrical Electrical part document is modified during the Instantiation from catalog. Electrical features in part need to be updated. Update is performed during instantiation and the part is modified. Update electrical features in the part. Electrical part document is not modified during the instantiation from catalog. EHI_1 (3) Electrical Update error window "Sketch is not valid for feature you want to create" when updating Bundle Segment of MultiBranchable part. Flexible curve attributes are not correctly valuated. Set the flexible curve attributes to correct value. No more error window. EHI_2 (2) Electrical The display of the names of electrical harness features ( Branch and Bundle Segments ) are not NLS (National Language Support) compatible. The display of the name of electrical harness features is given by Reference Designator attribute value and is not NLS compatible. Unset Reference Designator attribute value for Branch and Bundle Segments. New names are displayed for electrical harness features (Branch and Bundle Segments) , enabling NLS. compatibility. EHI_3 (2) (*) Electrical In file mode, if the root document is moved in another directory and the geometrical bundle document opened, electrical knowledge formula will not be visible. Electrical knowledge formulas under a geometrical bundle are not correctly created. If all formulas under the geometrical bundle are electrical, the relation set will be recreated correctly with the correct formulas. The root and geometrical bundle documents needs to be saved. EHI_4 (1) Electrical Bundle segments lead to twisted configuration if minimum bend radius is smaller than the diameter. The standard Rib geometrical feature cannot be collapsed. Replace the standard Rib by a collapsible one. No more update error (twisted configuration) for bundle segments have a bend radius smaller than the diameter. EXT_0 (3) (*) Specs Modeler Ghost Link in SendTo command. A link still exists to the pointing documents due to unused extensions feature. Unused extensions feature are deleted. Document needs to be updated. No more ghost links EXT_2 (3) (*) Specs Modeler Ghost links when opening a CATProduct. A Pop up message is displayed. The reference of an extension is not in the same document that the reference of its base feature (probably after a replace). The startup of the extension becomes also the reference of the extension. No data lost, only rerouting a link. No more ghost links to documents containing the old reference. FGM_1 (3) Topological Objects Size of CATPart abnormally huge comparatively to the number of elements. Some vertices have unnecessary geometric data (linked curves / surfaces). Some surfaces are over defined (unnecessarily extrapolated). Remove unnecessary geometric data. El Part es el mismo, pero mas pequeño. FIL_0 (2) Part Design During the edition of the fillet, an error "Internal error in mechanical modeler" is flashed. Support of some PointOnEdges (used to define radius for variable fillet) belongs to a ribbon different from the one to which the PointOnEdge itself belongs. Hence when the support edge is removed by the user (de-selection from UI), the corresponding PointOnEdge is not removed. This PointOnEdge then remains without support and gives an error "Internal error in mechanical modeler" when we try to access its support. Move the PointOnEdge (FilletRadius object containing it) to appropriate the ribbon. Some objects (the fillet concerned and its impacted features) are seen non-updated. Document needs to be updated. FS4_1 (3) V4V5integration ENOVIAVPM User views some ghost links pointing a V4 Model in a part created by V4toV5Interoperability. Declaration of a invalid Extension. Internal not used Extension. Deletion of Unwanted Extension. No more invalid V4 ghost links in V4ToV5Part. FTA_1 (1) (*) 3D Functional Tolerancing & Annotation Sometimes, unused external links (shape representation of a product) shown in Edit Links or File Desk. The TTRS ( Technologically and Topologically Related Surface ) features become invalid because their StartUp has been removed from the container. Deletion of the invalid TTRS features. In Edit Links, there are no more unused external links. FTA_2 (3) 3D Functional Tolerancing & Annotation No visibility. Unused elements (RGE, Reference Geometrical Elements) are present. Deletion of unused elements. El documento es el mismo, pero mas pequeño. FTA_3 (3) 3D Functional Tolerancing & Annotation No visibility. Unused elements (TTRS) are present. Deletion of unused elements. El documento es el mismo, pero más pequeño. FTA_4 (3) 3D Functional Tolerancing & Annotation Deletion of FTA annotations does not delete all Drafting internal entities (the visualization of FTA annotations is based on Drafting). Data size of a document is abnormally huge regarding its elements. When remove was called for FTA annotation, nothing was done in order to delete the Drafting annotations. Delete all Drafting annotations which are not pointed by FTA one. Reduce the size of the document. There is no link anymore between drafting annotations and FTA annotations.They are not used anymore in CATPart, CATProduct, CATProcess documents (they are in fact lost). Document needs to be updated. GIE_0 (2) Drafting A generated item cannot be used while creating associative dimensions. Generated Item without any associated reference curve. Deletion of the generated item. No impact, reduce the size of the document. GME_0 (1) (*) Generative Drafting Unrelated document can be pointed by the drawing document (it appears using Send To). An object managing graphic properties of generated items is not aggregated. Deletion of the object. No more ghost links in Send To command. GME_1 (1) (*) Generative Drafting Unrelated document can be pointed by the drawing document (it appears using Send To). An object managing graphic properties of generated items has an invalid link to a 3D document. Deletion of the invalid link. No more ghost links in Send To command. GNL_1 (3) (*) Generic Naming Ghost links in SendTo or Edit Links item. An internal of a Brep feature refers to a ghost external document. The external reference is removed. Ghost links have been removed. GNL_3 (3) (*) Generic Naming Abnormal size of a document. A GenericNaming Feature is not aggregated, resulting in a useless memory cost. The useless feature is removed. Reduce the size of the document. GSD_0 (3) Generative Shape Design Sometimes, the user can only see invalid "Parent / Children" or impact analyses. An object is aggregated under "Component" attribute but it is never used elsewhere. Suppresses these useless objects. Visually no impact, better 'Parent / Children' or impact analyses, reduces the size of the document. GSD_1 (1) Generative Shape Design The reference planes have the datum mask on their icon and can have been moved with the compass. The reference planes are turned into datum or flagged as contextual features. Reset the datum and\or contextual flags to 0. If a reference plane has been moved, a new one is created and added at the place of the moved reference plane. The moved reference place is renamed with the add of "moved by cleaner" to its alias. The icon of the reference plane has not the datum mask any more. A reference plane moved is renamed and a new reference plane is created. GST_0 (2) Generative Shape Design The user opens a CATPart with an unidentified object (broken icon) called RollingOffset. The Start-up inheritance of the object is broken, it is due to incorrect CATHybridShape.feat catalog construction. Re-plugs the broken instance with the correct start-up in the CATHybridShape catalog. Object now corresponding to a valid Rolling Offset. HIE_3 (3) SpecsModeler A product instance has too many sub-products. Hierarchy problem : the father of the reference is not the reference of the father. Over sub-products are deleted and product instance is synchronized. No more over sub-products. HIE_4 (1) (*) SpecsModeler When opening a CATProduct document or using the "Send to directory" command, a linked document is not found but that document should not be linked as it does not participate in the product structure. An internal object (connector) has an inconsistent state and retains an instance-reference link to a useless document. Remove the offending connectors. No more warning pop-up when opening the document HIE_5 (3) SpecsModeler After first clean, DOC_3 error is still there. A change of reference is made during save as operation when a private component can not find its reference, this change must be done by the CATDUA. The CATDUA change the reference of this component. Error DOC_3 is fixed completely by first pass of CATDUA. HIE_6(1) Product Structure Impossible to update the model: some assembly data (constraints) are invalid. Instance / Reference model mapping error for CONNECTION objects leads to invalid constraints: CONNECTION reference objects aggregated by an instance of ASMDISCIPLINE object. Invalid connections deletion. Document is now updated or can be updated, invalid constraints are deleted. HLV_0 (1) (*) Generative Drafting Unrelated document can be pointed by the drawing document (it appears using Send To). A generative view is not aggregated. Deletion of the object. No more ghost links in Send To command. HLV_1 (1) (*) Generative Drafting  The drawing document size can be out of proportion regarding the useful data contained inside. Unrelated document can be pointed by the drawing document (it appears using Send To).  A generative view is not aggregated Deletion of the non aggregated generative view. The drawing document size is normal again. No more ghost links in Send To command. IGP_1 (1) Robotics When cleaning any mechanism that has constraint created by FramesOfReference in Device Building, the constraint is deleted. TagConnectors created on constraint definition is not aggregated to any parent. So when cleaning up the document for any reason, the LIF_8 rules deletes all the floating connectors, that is why this TagConnector is deleted too. Hence the parts associated with the constraints are disconnected. Aggregate the floating TagConnectors with the TagGroup being its logical parent. TagConnectors are no more deleted when  cleaning the document. IGS_0 (3) Sketcher Use edges created when constraints created, then when deleting these constraints, use edges are not deleted and are therefore unnecessary (severity 3 since R9SP3). Use edges are not deleted when associated constraints are deleted. Unused elements (phantom operators) stay in the document. Deletion of unused elements. Document needs to be updated. Document is the same but smaller. JNT_1 (1) DMU Kinematics Mechanism cannot be simulated One or more kinematics joint axis are corrupted Deletion of the corrupted joint. Some joints are deleted. If you want to play again the Mechanism, you have to recreate the deleted joints. JNT_2 (1) DMU Kinematics Mechanism cannot be simulated. One or more geometries pointed by a kinematics joint are corrupted. Deletion of the corrupted joint. Some joints are deleted. If you want to play again the Mechanism, you have to recreate the deleted joints. JNT_3 (1) DMU Kinematics This Message is displayed when trying to play a Mechanism: "There is no Kinematics Data". Several Mechanism containers exist in the same CATProduct document. Deletion of all Mechanism containers except the first non-empty one. All the previous Mechanisms are restored correctly. JNT_4 (2) DMU Kinematics The user opens a document containing a mechanism, he modifies some constraints associated to the joints of the mechanism, updates the mechanism and saves his work. After reloading the document, the associated constraints are broken. When clicking on the "Mechanism Analysis" command, you can see "CATMacroPointCGM" or "CATSimCurveCGM" or any "CATXXXCGM" in the "Geometry 1" or "Geometry 2" columns. The problem was occurring at the joint creation. The joint creation command analyses the geometry selected by the user to create the joint and convert this geometry into "persistent" geometry. This conversion was not correctly done and the geometric stored objects were not understandable any more by the assembly model after saving it and reloading it. Repair the joint and the associated constraints by replacing the incorrect pointed geometric element by a correct one. When clicking on the "Mechanism Analysis" command, the geometry name is a correct name like "Point.1" or "Curve.1" for instance. Document needs to be updated. JNT_5 (2) DMU Kinematics The user opens a document containing a mechanism with at least one "Point on Curve" joint. He clicks on "Simulation with commands". One part involved in "Point On Curve" joint, jumps on a wrong position different from its current position. A "Point on Curve" Joint simulation is not correct. The problem comes from the Point on Curve Joint creation. The Point on Curve joint as a regular kinematic joint contains among its internal data some local frames. These frames locate the joint position regarding the parts and are used in the kinematic solver for simulation. In some rare case, the internal frames of the joint can not be created correctly. Note that a Point on Curve joint can only be repaired if the joint is not broken (i.e. the point is effectively on the curve.) Internal frames of the joint are updated. User can click on the "Simulation with commands" without any strange displacement for parts involved in a point on curve joint. Document needs to be updated KWE_1 (1) Knowledge No visible symptom. Knowledge Objects not aggregated. If these objects are not pointed, they are destroyed. If it is a parameter that is pointed, it is added to the parameter set. If it is a relation that is pointed, it is added to the relation set. No Visibility. KWE_2 (1) Knowledge a "!" information is displayed on a broken relation. A relation in a CATPart document points to elements in other documents. The relation is destroyed. Broken relation disappears. KWE_3 (2) Knowledge The output value of a relation is not consistent. After forcing relation evaluation, its value changes. The output parameter has been saved with a wrong value. The evaluation is forced. The output parameter is set to the good value. KWE_4 (2) Knowledge A Knowledge Check is broken. "!" information is displayed. An error in the stream involves bad pointing in the Check attributes. The links are restored correctly. The check is not broken. KWE_5(2) Knowledge A parameter external Reference was synchronized but with a wrong value. Even it was not possible to synchronize the External Ref and get the pointed value, the information of synchronization was stored. if the external Reference is synchronized and has a wrong value, the value is updated with the good one. The external Reference is synchronized and with a good value.
	Continua en paguina siguiente...
	Para obtener la lista completa de Códigos de Retorno del Data Upward Assistant, por favor vea La lista de Códigos de Retorno Detectados por el Data Upward Assistant.

 

Dirija sus preguntas a: juanri@muchocatia.es